BMW Light Up Emblem Description:
✅Environmentally friendly and power saving.
✅Durable and non-fading bright light beams.
✅Good vibration resistance and stable emitting light.
✅General model used in Auto lighting can be suitable to be applied in all types of vehicles.
BMW Light Up Emblem Feature:
Fitment: BMW 1 3 4 5 6 7 X1 X3 X5 X6 Series.
Size: 3.25*3.25inch(8.2 x 8.2CM) (pls check the size to see if it will fit to your car before purchasing!!!)
We will not be responsible for wrong size.
Wiring length: 0.6 meters
Material: ABS plating, 3M glue at the bottom
Package : 1Pcs BMW light up emblem.
How To Install BMW Light Up Emblem?
1.)Remove the original emblem from the BMW.
2.) Before applying this bmw light up emblem, please be sure to thoroughly clean the surface of the application to remove any dirt particles and any excessive adhesive from the original emblem.
3.) Remove any leftover adhesive from the original emblem, get as much off as you can to ensure the emblem sticks to the LED.
4.) Route the wires through the holes that are present on the vehicle and tap the wires to a power source you want the LED to turn on with such as your license plate lights or parking lights.
5.) Use a heat gun or blow dryer to heat up the adhesive on the back of the LED and apply it ONCE. It is very important that you align the LED properly prior to sticking it on, applying and sticking it off then taking off will cause the adhesive to lose its stickiness.
6.) Once you have the BMW light up emblem Light applied and positioned correctly, apply pressure to the emblem and hold it for 1-2 minutes. After holding it, use Automotive Painter’s Tape to secure the emblem and LED to the vehicle.
7.) Use a heat gun or blow dryer to heat up the LED emblem to get rid of any moisture or air pockets between your bmw and LED emblem (be careful not to damage the product or vehicle).
8.) Allow the adhesive to cure and settle after 30 minutes, after that period, you can remove the tape.
Questions and answersQ & A.
1:Can it fit all year models?
As our experience.It almost fit all year models.But because we can not know and master all data for all years car.we suggest you can also check the size of the original logo.
if your measurement is less 0.05cm-0.1cm to our size.it will be no problem to fit.and there is also 3M tape on the back to help to fix.
2:One item have 3 color light?
No.One Light only have one color.and there are 3 colors you can choose for this item.they are Red/white/blue.
It is Easy,Red wire to the battery+,black wire to the battery-.
Yes,we offer one year warranty.
Not Enough for your car decor? Check here More BMW logo Lights: https://www.carledlogo.com/ghost-shadow-lights/bmw-door-projector-lights/
Due to the light and screen setting difference, the item’s color may be slightly different from the pictures.