3rd & 4th Gen VW Rear LED Emblem — 90mm / 100mm / 110mm
Upgrade your VW with a rear LED emblem that lights up the moment your taillights kick on. Available in three sizes (90mm, 100mm, 110mm) and two distinct styles — a clean static illuminated look or a dynamic sequential animation — this badge is a direct wiring swap for your factory rear emblem location.
Key Features
- Three Size Options: Choose 90mm, 100mm, or 110mm to match your exact factory emblem mount — check your current emblem’s diameter before ordering.
- Two Styles to Choose From: 3rd Gen delivers a fully illuminated or line-style glow with no animation. 4th Gen adds a dynamic sequential light-up effect in silver-with-line or white-fully-illuminated finishes.
- Plug-and-Play Wiring: Both generations come pre-wired with pins that connect directly into your existing taillight harness — no splicing required.
- Red LED Illumination: Bright, consistent red glow visible day and night.
Vehicle Fitment
Size varies by model year and trim — if you’re unsure whether your car takes the 90mm, 100mm, or 110mm version, measure your factory emblem or contact us before ordering.
Installation Notes — Please Read Before Ordering
This emblem plugs directly into your taillight wiring, but routing the wire requires drilling a small hole through the trunk/liftgate panel. Please make sure you’re comfortable with this step before ordering.
Wiring Guide
- Red wire → Connect to taillight positive (do NOT connect to the brake wire)
- Black wire → Connect to ground
If the emblem flickers after installation, this usually means an unstable voltage source — try an alternate plug point on the taillight harness.
What’s Included
- 1x VW Rear LED Emblem (size and style as selected)
Frequently Asked Questions
Which size do I need — 90mm, 100mm, or 110mm?
Size depends on your Atlas or Touareg’s model year and trim. Measure the diameter of your current factory rear emblem, or contact us with your VIN or model year and we’ll confirm the correct size before you order.
What’s the difference between 3rd Gen and 4th Gen styles?
3rd Gen emblems light up in a fixed, non-animated pattern (fully illuminated or line style). 4th Gen emblems add a dynamic sequential animation and are available in silver-with-line or white-fully-illuminated finishes.
Do I need to drill into my car to install this?
Yes — routing the wiring requires drilling a small hole through the trunk or liftgate panel. The emblem itself is plug-and-play once the wire is routed through.
What’s your return policy on this product?
We offer a 60-day warranty on defective products. Because sizing is confirmed with you before shipping, we’re unable to accept returns or exchanges for incorrect size selections — please double-check your vehicle’s size before ordering, or reach out and we’ll help confirm.
Reviews
There are no reviews yet.